Industrial Casters & Replacement Casters
Heavy Duty Casters
X Casters Series
Twin Wheel Casters
Table Glides &
Leg Plates & More
Sockets & Brackets
Call 800-445-4337 for more info
Email Us For More Information
Minimum Order of $100 Required
Request for Quote
Industrial casters | Casters wheels | Brakes locking | Rigid Swivel | Furniture hardware
Caster wheels rollers | Plastic | Rubber | Phenolic | Polyurethane
Caster Wheel Types | Plastic | rubber | polypropylene | polyurethane
Plastiglide Conductive Wheels | Casters
Item # 26962-1125-0230
Item # 26962-1125-0230
3X1-1/4 SOFT CONDUCTIVE BUSHED WHEEL
Proprietary non-marking conductive (anti-static) rubber compound mixed and manufactured in the USA.
Combines the mechanical properties of rubber (load capacity, durability, quiet roll) with enhancements to the compound chemistry to produce high electrical conductivity. Our conductive wheels meet the requirements of the Underwriters Laboratories (UL) federal specifications FF-C-77 and FF-C-88, which requires an average electrical resistance of less than 250,000 ohms.
All conductive wheels are identified with a red dot on each side and have a sintered bearing to ensure conductivity throughout the entire wheel and assembly. Available in soft and hard rubber.
Conductive wheels are ideal for applications in the electronics, computers, and medical industries in which allowing for the safe discharge of static electricity build-up is critical to protecting sensitive equipment from electrical damage and patient safety. Conductive wheels can also prevent sparks that cause flammable vapors to ignite (e.g., surgical or lab environments).
The resistance of electrostatic conductive rubber compounds may increase with age, service, and build-up of dirt/dust. Maintaining a clean contact surface between the wheel and floor is important in maximizing the anti-static characteristics of the compound. Since the manufacturer has no control over these conditions, no guarantee of continuing level of conductivity is made and it is recommended that the resistance of the conductive assembly be tested at routine intervals.
Conductive Soft Rubber
Email This Page
Save To Favorites
Jacob Holtz Wheel Selection Broucher
10 Industrial Hwy, MS-6 | Airport Business | Complex "B" | Lester, PA 19029 | Phone:
| © 2010-